Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Toll Free: 855.979.8312
Phone: 813.626.8177
Fax: 813.628.0187
Email: info@compressedairsystems.com
Website: www.compressedairsystems.com
Print Back
For measuring immediately downstream of the compressor in moist air up to 356 ºF
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Measuring Range (Compressed Air)

 N/A 6.56 to 735 ft/s

Differential Pressure for Gases

 N/A 0.04 to 500 mbar

Measured Medium

 N/A Air Non-Aggressive Gases

Accuracy

 N/A ± 1.5% of Measured Value (M.V.)

Measuring Principle

 N/A 1:100

Measuring Span

 N/A t 99: < 1 sec.

Temperature of The Medium

 N/A -22 to 356 ºF

Operating Pressure

 N/A -14.5 to +435.1 psig

Ambient Temperature

 N/A -4 to +158 ºF

Direct Current (DC) Voltage

 N/A 18 to 36 V

Power

 N/A 5 W

Outputs

 N/A As standard: RS 485 (Modbus-RTU), 4…20 mA, pulse

Optional Output

 N/A Ethernet Interface M-Bus Power over Ethernet (PoE)

Benefits

Benefits

 N/A Benefits at a glance:
  • New: Unique sensitivity in the lower measuring range: Measures from as little as 6.56 f/s and thus covers the complete operating range of variable speed drive (VSD) compressors
  • Particularly suitable for extremely high flow rates
  • Flow, total consumption, temperature and pressure
  • Measurement at high temperatures, max. temperature 356 ºF
  • Can be used in pipes from 3/4" to 24"
  • Installation via 1/2" ball valve under pressure

Field of Application

Field of Application

 N/A
  • Measurement immediately downstream of the compressor
  • Measurement at high temperatures

Typical Applications

Typical Applications

 N/A
  • Measurement of the capacity of compressors
  • Compressed air audits
  • Efficiency measurement of compressed air systems

Installation Requirements

Installation Requirements

 N/A
  • After functioning water separator
  • In horizontal lines (recommended) or in risers

Additional Information

N/A The integrated, precise differential pressure sensor measures the differential pressure/ dynamic pressure at the sensor tip. The pressure depends on the respective gas velocity.

The flow is therefore easy to determine by means of the pipe diameter.

The additional measurement of temperature and absolute pressure and calculation of the relevant density means that measuring can be carried out for various gases, a wide variety of temperatures and pressures.