CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life.
Request Information Finance with Approve Payments
Unit of Measure
Items
CAS 10hp Rotary Screw (Kohler Diesel)

CAS Portable Rotary Screw Air Compressor
Web Price Quote
CAS 10hp Rotary Screw (Kohler Diesel)

CAS Portable Rotary Screw Air Compressor
Web Price Quote
CAS Diesel Driven Reciprocating Air Compressor (10 HP)

10HP Deisel Engine Air Compressor Elite
Web Price Quote
CAS Diesel Driven Reciprocating Air Compressor (10 HP)

17HP Diesel Engine Air Compressor Elite
Web Price Quote
CAS TX Vehicle Mounted Diesel Compressors

CAS TX 40 Inch (in) Length Vehicle Mounted Diesel Compressor
Web Price Quote
Description N/A The CAS portable screw compressors are designed for the most demanding portable compressor applications. The screw air end is designed for years of service in high duty cycle applications. If your application calls for high cfm output in a small package the CAS portable screw compressor is built with you in mind.

RS 3 Pump Features:

  • Electric start motor idles when unloaded
  • 30 gallon ASME receiver unit delivers 60 cfm @ 150psi.
  • Operating pressures from 100-180 psi
  • German made rotary screw air end spin on separator and oil filter
  • low oil shut down and temp shut down
  • High pressure shut down
Discontinued - Please see item# RS26GED30 		N/A The CAS portable screw compressors are designed for the most demanding portable compressor applications. The screw air end is designed for years of service in high duty cycle applications. If your application calls for high cfm output in a small package the CAS portable screw compressor is built with you in mind. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life.
Engine Type N/A N/A N/A Kohler® 442 N/A Kohler® 1028 N/A Diesel
Horsepower N/A 17 hp N/A 25 hp N/A 8.8 hp N/A 17 hp N/A
Flow at 100 Pound Per Square Inch (psi) Pressure N/A 40 ft³/min N/A 82 ft³/min N/A 18.5 ft³/min N/A 36 ft³/min N/A
Flow at 175 Pound Per Square Inch (psi) Pressure N/A N/A N/A 16.5 ft³/min N/A 34 ft³/min N/A 22 ft³/min
Pump N/A RS3 N/A NK60 N/A CA1U N/A CA2U N/A
Pump Speeds N/A 6000 RPM N/A 6000 RPM N/A 807 RPM N/A 794 RPM N/A
Tank Size N/A N/A N/A 30 gal N/A 30 gal N/A
Length N/A N/A N/A 42 in N/A 48 in N/A 40 in
Width N/A N/A N/A 22 in N/A 34 in N/A 20 in
Height N/A N/A N/A 42 in N/A 48 in N/A 26 in
Weight N/A N/A N/A 600 lb N/A 940 lb N/A
Pump Warranty (Optional) N/A N/A N/A N/A N/A 5 year
Industry Standards/Certifications N/A
Features N/A N/A G-43 Pump Features:
  • Electric start motor idles when unloaded
  • 30 gallon ASME receiver unit delivers 60 cfm @ 150psi.
  • Operating pressures from 100-180 psi
  • German made rotary screw air end spin on separator and oil filter
  • low oil shut down and temp shut down
  • High pressure shut down
 		N/A

Access to compressor valves without compressor head removal
Alternator on drive engine
ASME tested powder coated steel tank
Bearings on both ends of the crank shaft
Centrifugal unloader
Critical controls protected by compressor base plate
Disk and spring valves
Drive engine on left side for safety
Fully enclosed belt guard
Full saddle mounting feet instead of pegged mounting feet
Heavy-duty air filter
Heavy-duty two-stage solid cast iron pump
Industrial-duty engine
Needle bearings, and inserts on rods
Pilot valve continuous operation
Stainless steel flex air lines
Swedish steel valves
Torrington needle bearings
2-grove B width drive pulley

 		N/A

  • Access to compressor valves without compressor head removal

  • Alternator on drive engine

  • ASME tested powder coated steel tank

  • Bearings on both ends of the crank shaft

  • Centrifugal unloader

  • Critical controls protected by compressor base plate

  • Disk and spring valves

  • Drive engine on left side for safety

  • Fully enclosed belt guard

  • Full saddle mounting feet instead of pegged mounting feet

  • Heavy-duty air filter

  • Heavy-duty two-stage solid cast iron pump

  • Industrial-duty engine

  • Needle bearings, and inserts on rods

  • Pilot valve continuous operation

  • Stainless steel flex air lines

  • Swedish steel valves

  • Torrington needle bearings

  • 2-grove B width drive pulley

 		N/A
  • Electric start drive engine
  • Engine idle control to meet air demand
  • Industrial grade drive engine
  • Industrial grade reciprocating pump
  • JIC quick connect air & oil lines
  • Low engine oil shutdown
  • Quick service compressor filters
  • Vibration mounting pads
Elite Features N/A N/A N/A
  • Automatic tank drain
  • Belt guard after cooler
  • On-board battery mounted and wired. (No truck wiring needed)
  • Tank discharge ball valve
  • Vibration pads
  • Freight pre-paid in the 48 states & southern Canada
 		N/A
  • Automatic tank drain
  • Belt guard after cooler
  • On-board battery mounted and wired. (No truck wiring needed)
  • Tank discharge ball valve
  • Vibration pads
  • Freight pre-paid in the 48 states & southern Canada
 		N/A
Options N/A N/A N/A N/A N/A
  • Battery for engine electric start
  • Cold weather heating package
  • Compressed air regulator control pack
  • Cover color change
  • Drive engine control extension
  • High ambient temperature cooling package
  • 6 or 12 gallon EPA, DOT rated fuel cells
  • 6 or 30 gallon air storage tank
Note N/A N/A N/A N/A N/A 12 Volt Control voltage connection to be supplied by vehicle/equipment compressor is mounted to Dimensions are representatives of package dimensions not total space required for mounting.

No Start Up Kit Required.

Optional 5-year Pump Warranty Available.
Flow at 125 Pound Per Square Inch (psi) Pressure N/A N/A N/A N/A N/A 24 ft³/min
Engine Brand N/A N/A N/A N/A N/A Kohler
Engine Start N/A N/A N/A N/A N/A Electric
Auxiliary Fuel Tank Required N/A N/A N/A N/A N/A No
Tank Capacity N/A N/A N/A N/A N/A 30 gal6 gal
Voltage N/A N/A N/A N/A N/A 12 V
Power N/A
Mounting N/A
Tank Orientation N/A
Drive Engine N/A
Air Flow at 175 psi N/A
Generator Power N/A
Welder Current N/A
Outlets Voltage N/A
Current at 120 Volt (V) Voltage N/A
Current at 240 Volt (V) Voltage N/A
Flow at 150 Pound Per Square Inch (psi) N/A 39 ft³/min N/A 80 ft³/min N/A N/A N/A
Brands N/A Kohler Diesel N/A Kohler Diesel N/A N/A N/A
Tank N/A 30 gal N/A 30 gal N/A N/A N/A
Operating Pressure N/A
Elite Package Features N/A