CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life.
Request Information Finance with Approve Payments
Unit of Measure
Items
CAS Diesel Driven Reciprocating Air Compressor (10 HP)

10HP Deisel Engine Air Compressor Elite
Web Price Quote
CAS Diesel Driven Reciprocating Air Compressor (10 HP)

17HP Diesel Engine Air Compressor Elite
Web Price Quote
CAS TX Vehicle Mounted Diesel Compressors

CAS TX 40 Inch (in) Length Vehicle Mounted Diesel Compressor
Web Price Quote
CAS TX Vehicle Mounted Diesel Compressors

CAS TX 46 Inch (in) Length Vehicle Mounted Diesel Compressor
Web Price Quote
Piston Diesel Compressors

CAS TX 44 Inch (in) Length Piston Diesel Compressor
Web Price Quote
Description N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. N/A CAS Industrial-duty diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life.
Engine Type N/A Kohler® 442 N/A Kohler® 1028 N/A Diesel N/A Diesel N/A
Horsepower N/A 8.8 hp N/A 17 hp N/A N/A N/A
Flow at 100 Pound Per Square Inch (psi) Pressure N/A 18.5 ft³/min N/A 36 ft³/min N/A N/A N/A
Flow at 175 Pound Per Square Inch (psi) Pressure N/A 16.5 ft³/min N/A 34 ft³/min N/A 22 ft³/min N/A 35 ft³/min N/A
Pump N/A CA1U N/A CA2U N/A N/A N/A
Pump Speeds N/A 807 RPM N/A 794 RPM N/A N/A N/A
Tank Size N/A 30 gal N/A 30 gal N/A N/A N/A
Length N/A 42 in N/A 48 in N/A 40 in N/A 46 in N/A 44 in
Width N/A 22 in N/A 34 in N/A 20 in N/A 20 in N/A 23 in
Height N/A 42 in N/A 48 in N/A 26 in N/A 30 in N/A 44.0 in
Weight N/A 600 lb N/A 940 lb N/A N/A N/A 575 lb
Pump Warranty (Optional) N/A N/A N/A 5 year N/A 5 year N/A 5 year
Industry Standards/Certifications N/A N/A N/A N/A N/A American Society of Mechanical Engineers (ASME)
Features N/A

Access to compressor valves without compressor head removal
Alternator on drive engine
ASME tested powder coated steel tank
Bearings on both ends of the crank shaft
Centrifugal unloader
Critical controls protected by compressor base plate
Disk and spring valves
Drive engine on left side for safety
Fully enclosed belt guard
Full saddle mounting feet instead of pegged mounting feet
Heavy-duty air filter
Heavy-duty two-stage solid cast iron pump
Industrial-duty engine
Needle bearings, and inserts on rods
Pilot valve continuous operation
Stainless steel flex air lines
Swedish steel valves
Torrington needle bearings
2-grove B width drive pulley

 		N/A

  • Access to compressor valves without compressor head removal

  • Alternator on drive engine

  • ASME tested powder coated steel tank

  • Bearings on both ends of the crank shaft

  • Centrifugal unloader

  • Critical controls protected by compressor base plate

  • Disk and spring valves

  • Drive engine on left side for safety

  • Fully enclosed belt guard

  • Full saddle mounting feet instead of pegged mounting feet

  • Heavy-duty air filter

  • Heavy-duty two-stage solid cast iron pump

  • Industrial-duty engine

  • Needle bearings, and inserts on rods

  • Pilot valve continuous operation

  • Stainless steel flex air lines

  • Swedish steel valves

  • Torrington needle bearings

  • 2-grove B width drive pulley

 		N/A
  • Electric start drive engine
  • Engine idle control to meet air demand
  • Industrial grade drive engine
  • Industrial grade reciprocating pump
  • JIC quick connect air & oil lines
  • Low engine oil shutdown
  • Quick service compressor filters
  • Vibration mounting pads
 		N/A
  • Electric start drive engine
  • Engine idle control to meet air demand
  • Industrial grade drive engine
  • Industrial grade reciprocating pump
  • JIC quick connect air & oil lines
  • Low engine oil shutdown
  • Quick service compressor filters
  • Vibration mounting pads
 		N/A
  • Access to compressor valves without compressor head removal
  • Alternator on drive engine
  • ASME tested powder coated steel tank
  • Bearings on both ends of the crank shaft
  • Centrifugal unloader
  • Critical controls protected by compressor base plate
  • Disk and spring valves
  • Drive engine on left side for safety
  • Fully enclosed belt guard
  • Full saddle mounting feet instead of pegged mounting feet
  • Heavy-duty air filter
  • Heavy-duty two-stage solid cast iron pump
  • Industrial-duty engine
  • Needle bearings, and inserts on rods
  • Pilot valve continuous operation
  • Swedish steel valves
  • Torrington needle bearings
  • 2-grove B width drive pulley
Elite Features N/A
  • Automatic tank drain
  • Belt guard after cooler
  • On-board battery mounted and wired. (No truck wiring needed)
  • Tank discharge ball valve
  • Vibration pads
  • Freight pre-paid in the 48 states & southern Canada
 		N/A
  • Automatic tank drain
  • Belt guard after cooler
  • On-board battery mounted and wired. (No truck wiring needed)
  • Tank discharge ball valve
  • Vibration pads
  • Freight pre-paid in the 48 states & southern Canada
 		N/A N/A N/A
Options N/A N/A N/A
  • Battery for engine electric start
  • Cold weather heating package
  • Compressed air regulator control pack
  • Cover color change
  • Drive engine control extension
  • High ambient temperature cooling package
  • 6 or 12 gallon EPA, DOT rated fuel cells
  • 6 or 30 gallon air storage tank
 		N/A
  • Battery for engine electric start
  • Cold weather heating package
  • Compressed air regulator control pack
  • Cover color change
  • Drive engine control extension
  • High ambient temperature cooling package
  • 6 or 12 gallon EPA, DOT rated fuel cells
  • 6 or 30 gallon air storage tank
 		N/A
  • Engine control extension
  • Filter Regulator
  • Front mount battery
  • Heavy-duty marine-grade battery
Note N/A N/A N/A 12 Volt Control voltage connection to be supplied by vehicle/equipment compressor is mounted to Dimensions are representatives of package dimensions not total space required for mounting.

No Start Up Kit Required.

Optional 5-year Pump Warranty Available. 		N/A 12 Volt Control voltage connection to be supplied by vehicle/equipment compressor is mounted to Dimensions are representatives of package dimensions not total space required for mounting.

No Start Up Kit Required.

Optional 5-year Pump Warranty Available. 		N/A No Start Up Kit Required.

Optional 5-year Pump Warranty Available.
Flow at 125 Pound Per Square Inch (psi) Pressure N/A N/A N/A 24 ft³/min N/A 37 ft³/min N/A
Engine Brand N/A N/A N/A Kohler N/A Kohler N/A
Engine Start N/A N/A N/A Electric N/A Electric N/A
Auxiliary Fuel Tank Required N/A N/A N/A No N/A Yes N/A
Tank Capacity N/A N/A N/A 30 gal6 gal N/A 30 gal6 gal N/A 30 gal
Voltage N/A N/A N/A 12 V N/A 12 V N/A
Power N/A N/A N/A N/A N/A 10 hp
Mounting N/A N/A N/A N/A N/A Tank
Tank Orientation N/A N/A N/A N/A N/A Horizontal
Drive Engine N/A N/A N/A N/A N/A Kohler Diesel
Air Flow at 175 psi N/A N/A N/A N/A N/A 16 ft³/min
Generator Power N/A N/A N/A N/A N/A 5500 W
Welder Current N/A N/A N/A N/A N/A 210 A
Outlets Voltage N/A N/A N/A N/A N/A 110 V220 V
Current at 120 Volt (V) Voltage N/A N/A N/A N/A N/A 41 A
Current at 240 Volt (V) Voltage N/A N/A N/A N/A N/A 20 A
Flow at 150 Pound Per Square Inch (psi) N/A