Request Information
Unit of Measure
Items
Image-for-page-5-Binder-2-P

PANTHER® 5:1 Bare Carbon Steel Stub Oil Piston Pump with Bung Adapter
Web Price $828.00
Image-for-page-10-Binder-2-P

Lion™ 350 5:1 Stub Bung Oil Piston Pump
Web Price $901.00
Image-for-page-4-Binder-2--P

PANTHER® 3:1 Oil Piston Pump with Bung Adapter
Web Price $808.00
Approve Payments N/A Finance with Approve Payments

Manufacturer N/A Balcrank
Brands N/A Balcrank
Model N/A PANTHER® HP 5:1 Pumps N/A Lion™ 350 - 5:1 Pump N/A PANTHER® HP 3:1 Pumps
Acceptable Mediums N/A Based Lubricants Gear Oil Hydraulic Fluid Synthetic and Mineral Transmission Fluid N/A Based Oils Gear Oil Hydraulic Oil Synthetic and Mineral Transmission Fluid N/A
Ratio N/A 5:1 N/A 5:1 N/A 3:1
Operating Air Pressure N/A 10 to 150 psi0.7 to 10 bar N/A 30 to 175 psi2 to 12 bar N/A
Efficiency N/A 57 cycles/gal15.06 cycles/liter N/A N/A
Maximum Fluid Stall Pressure at 150 Pound Per Square Inch (psi) (10 Bar) Pressure N/A
Effective Air Piston Diameter N/A 2.5 in63.5 mm N/A N/A
Free Flow Pump Delivery1 N/A 6 gpm30 L/min N/A N/A
Air Consumption N/A N/A 12.4 cfm350 nL/min N/A
Maximum Pressure N/A N/A 170 psi12 bar N/A
Air Motor Effective Diameter N/A N/A 3.25 in80 mm N/A
Air Motor Stroke N/A N/A 3.15 in80 mm N/A
Delivery at 80 Cycles Per Minute (cpm) for 100 Pounds per Square Inch (psi) N/A N/A 3.2 g/min N/A
Delivery at 80 Cycles Per Minute (cpm) for 5 bar N/A N/A 12 L/min N/A
Flow Rate N/A N/A 8 g/min30 L/min N/A
Air Inlet Size N/A 1/4 in N/A 3/8 in N/A
Air Inlet Thread Type N/A National Pipe Tapered (NPT) Female N/A National Pipe Tapered (NPT) Female N/A
Fluid Inlet Size (Stub Pump Only) N/A N/A 1-1/2 in N/A
Fluid Inlet Size N/A 1 in1-1/2 in N/A N/A
Fluid Inlet Port Thread Type N/A N/A National Pipe Tapered (NPT) Female N/A
Fluid Inlet Port Thread Type for 1 Inch (in) N/A National Pipe Tapered (NPT) Female N/A N/A
Fluid Inlet Port Thread Type for 1-1/2 Inch (in) N/A National Pipe Tapered (NPT) Male N/A N/A
Fluid Outlet Size N/A 1/2 in N/A 1/2 in N/A
Fluid Outlet Port Thread Type N/A National Pipe Tapered (NPT) Female N/A National Pipe Tapered (NPT) Female N/A
Wetted Materials N/A Aluminum Buna-N™ Nickel Plated Steel Nylon Stainless Steel Steel Ultrathane N/A Aluminum Hard Chromed Steel Nitrile Butadiene Rubber (NBR) Polyurethane Steel N/A
Service Bulletin N/A SB 1064 N/A SB 1155 N/A
Dimension A N/A 23.5 in523.9 mm N/A N/A
Dimension B N/A 14-3/8 in285 mm N/A N/A
Dimension C N/A 2-4/5 in71 mm N/A N/A
Dimension D N/A 6-1/2 in158.7 mm N/A N/A
Applications N/A
  • Medium sized tank packages
  • Medium volume maintenance shops
  • Small car dealerships
  • Quick lubes
 		N/A
  • Railroad and mass transit vehicle maintenance
  • Fleet service facilities
  • Marine
  • Auto and truck dealerships
  • Mining and construction
  • Lube truck
 		N/A
Note N/A Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.

Contact Balcrank for specific system design performance and technical data.

Product specifications are subject to change without prior notice 		N/A Product specifications are subject to change without prior notice

Pressure relief valve kit included with this pump. 		N/A
Warning N/A Do not use any Pride series products with flammable fluids.

Verify fluid compatibility with MSDS sheets. 		N/A N/A
Additional Information N/A N/A N/A Sell Against Graco 225 Pump - 1 to 2 Dispense Points - 300 ft to Furthest Dispense Point.
  • 1 SAE 10W30 oil, 68 ºF (20 ºC), 150 psi (10 bar) Air Pressure